ROUND Pools Ambassador Spécifications télécharger pdf (Page 9)

LEVELING THE GROUND

Using the “CLEARANCE SIZE” chart on page 6, determine the clearance size for your pool.

With the use of the leveling device shown and a shovel start leveling the ground, removing all grass

and sharp objects such as sticks and stones.

Level area to the lowest spot within the clearance radius. DO NOT FILL IN LOW SPOTS. Give

special attention to the outer part of the circle as this is where the bottom track and pool wall will

rest and must be absolutely level. Clearance radius = ½ pool width + 6".

CARPENTER’S LEVEL

DO NOT FILL IN DIG AWAY HERE

CLEARANCE RADIUS

LEVEL AREA

The assembled pool

must have a vertical

distance of 3' from the

top of the pool to the

adjoining grade and

the adjoining grade

must remain level for

a distance of 4' away

from the pool. Refer

to the drawing at right.

3 FT.

4 FT.

CENTER STAKE

NAIL

2”x 4”

PREVIOUS GRADE

WARNING - LEVELING THE GROUND

THIS IS THE MOST IMPORTANT PART OF YOUR PREPARATION OF POOL SITE.

YOU MUST GIVE CAREFUL ATTENTION TO THIS PHASE.

REMEMBER — YOUR POOL MUST BE INSTALLED ON SOLID LEVEL SURFACE.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Pas de commentaire

ROUND Pools Ambassador Spécifications Page 9