ROUND Pools CENTURY Manuel d'utilisateur télécharger pdf (Page 30)

No Diving or Jumping. Observe all Safety Rules.

1-26

c. Repeat steps (a) and (b) for the rest of

the base U-channels and trenches.

d. Use the carpenter’s level to make sure

the point shown in diagram 34 is ex-

actly level with the rest of the cleared

area and the base plates (the base

plates will be installed in Section 2).

If it is not, the base U-channel must

be removed and the crushed limestone

(or equivalent) and patio stone ad-

justed.

8. Assemble Buttresses

a. Assemble one upright channel (key 1)

with two T-plates (key 2 and 3) and

one L-plate (key 4) (one each of sizes

short, medium and tall) on one side

using eight bolts (key 5) and nuts (key

6). The bolt heads should be on the

outside of the T- and L-plates and the

nuts on the inside of the upright chan-

nel. Do not tighten the bolts yet. Be

sure to follow the drawing carefully to

have the T- and L-plates and upright

channel facing the right direction (the

T-plates each have a radiussed corner;

this radiussed corner must face away

from the open side of the upright

channel).

b. Repeat step (a) for the other side of

the upright channel with three more

T- and L-plates.

Hint:

Use a saw-horse to sup-

port the upright channel

while you attach the

T-plates.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Pas de commentaire

ROUND Pools CENTURY Manuel d'utilisateur Page 30