ROUND Pools CENTURY Spécifications télécharger pdf (Page 7)

Your pool must be installed on a solid level surface. Drive a stake into the ground at the center of

your pool location. Use a length of string tied to the center stake, see clearance chart for your size

pool, and mark the area using a can of spray paint or flour. With the use of the leveling device shown

and a shovel, start leveling the ground, removing all grass and sharp objects such as sticks and

stones.

Level area to the lowest spot within the clearance radius. DO NOT FILL IN LOW SPOTS. Give

special attention to the outer part of the circle as this is where the bottom track and pool wall will rest

and must be absolutely level.

PREPARING THE GROUND

CARPENTER’S LEVEL

DO NOT FILL IN DIG AWAY HERE

CLEARANCE RADIUS

LEVEL AREA

WARNING - LEVELING THE GROUND

THIS IS THE MOST IMPORTANT PART OF YOUR PREPARATION OF POOL SITE.

YOU MUST GIVE CAREFUL ATTENTION TO THIS PHASE.

REMEMBER — YOUR POOL MUST BE INSTALLED ON SOLID LEVEL SURFACE.

CLEARANCE

RADIUS=1/2

POOL DIAMETER + 6"

12' Pool = 6' 6"

15' Pool = 8'

18' Pool = 9' 6"

21' Pool = 11'

24' Pool = 12' 6"

27' Pool = 14'

30’ Pool = 15’ 6”

The assembled pool

must have a vertical

distance of 3' from the

top of the pool to the

adjoining grade and

the adjoining grade

must remain level for

a distance of 4' away

from the pool. Refer to

the drawing at right.

PREVIOUS GRADE

3 FT.

4 FT.

CENTER STAKE

NAIL

2”x 4”

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

ROUND Pools CENTURY Spécifications Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Piscines hors sol ROUND Pools CENTURY