ROUND Pools CENTURY Manuel d'installation télécharger pdf (Page 29)

No Diving or Jumping. Observe all Safety Rules.

3-7

3-5

Remember:

Do not trim off the

excess liner. (If the liner

ever needs to be removed,

trimming the liner will

make re-installation very

difcult.) Instead, roll up

any excess liner and tape it

in place near the top of the

pool wall.

3. Fasten the Liner in place (Hung/J or V-Bead Liner only)

a. With a V-Bead liner you will not

use the plastic coping strips that are

packed in the parts carton of your

pool. You can discard those pieces,

if they are included, as they only ap-

ply to pools with overlap liners.

b. The top of the wall of the liner has

what is called a “V-Bead” welded

onto it. Simply open up the bead

with your ngers and hang it directly

on top of the pool wall. When this

is done properly, the only portion on

the outside of the pool wall is ap-

proximately 1” of the V-Bead. No

printed liner material is actually

going over the top of the wall to the

outside of the wall.

c. Make sure the bead is on evenly

around the entire pool, and that the

liner is hanging straight down from

the top of the wall. The liner should

not have creases in it because it is

twisting around the pool. If the liner

is twisting, it is because it is not

sitting properly in the pool. Make

necessary adjustments before pro-

ceeding.

NOTE: Some liners may t very tightly,

it is better to install uprights, top

plate and top ledge before going onto

next step. See Section 4.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

ROUND Pools CENTURY Manuel d'installation Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Piscines hors sol ROUND Pools CENTURY